Ballistol Silencer Cleaner is an acid-free cleaning liquid for dissolving soot and combustion residue inside firearm suppressors.
Ballistol Silencer Cleaner is an acid-free cleaning liquid for dissolving soot and combustion residue inside firearm suppressors. It works largely without mechanical assistance during soaking, can be used with both sealed and dismantlable suppressors, and changes colour as contamination is released. The recommended exposure time for normal fouling is at least two hours. Suitable for use Cleaning dismantlable suppressors Cleaning sealed or non-dismantlable suppressors Removing soot from internal suppressor components Dissolving and neutralising combustion residue Cleaning chambers, baffles and narrow internal openings Thorough maintenance after a high number of shots Soak-cleaning suppressors and their components Use in a suitable ultrasonic bath Cleaning carbon-fouled parts from gas-operated firearms Cleaning carbon-fouled components from AR-15-type firearms Why choose Ballistol Silencer Cleaner? Dissolves and neutralises combustion residue Removes accumulated carbon and soot Works during soaking without continuous mechanical cleaning Suitable for dismantlable and sealed suppressors Acid-free formulation Gentle on common materials Built-in colour indicator shows the cleaning process Contains surface-active cleaning agents Includes a corrosion-protection additive Suitable for ultrasonic-bath use Miscible with water and easy to rinse out The 500 ml bottle can be used for filling a suppressor or soaking components Technical specifications Product code: 23381 EAN: 4017777233810 Manufacturer: Ballistol Product name: Silencer Cleaner Product type: Suppressor-cleaning liquid Intended use: Dissolving and neutralising soot and combustion residue Contents: 500 ml Container: Bottle Application: Filling, soaking or immersing components Normal exposure time: At least 2 hours Heavy-fouling exposure time: Approximately 4–8 hours Extreme-fouling exposure time: Up to 24 hours Recommended cleaner temperature for heavy fouling: Up to 40 °C Recommended rinsing-water temperature: Approximately 35 °C Suitable for ultrasonic baths: Yes Acid-free: Yes Colour indicator: Yes Corrosion-protection additive: Yes Appearance: Colourless and clear Odour: Characteristic orange scent pH value: 8 Boiling point: Approximately 80 °C Relative density: 1.05 g/cm³ at 20 °C Solubility in water: Miscible Signal word: Danger Hazard: Causes serious eye damage Composition: Contains orange terpenes that may cause an allergic reaction Supplied with Ballistol Silencer Cleaner 500 ml bottle Frequently asked questions Is it suitable for a non-dismantlable suppressor? Yes. Seal one end of the suppressor with a suitable plug and fill it with cleaning liquid. Allow at least two hours for normal fouling. Empty the cleaner, fill the suppressor approximately halfway with water at about 35 °C, close the openings and shake it thoroughly. How is a dismantlable suppressor cleaned? Dismantle the suppressor only as described by its manufacturer and immerse the parts completely in the cleaning solution. After soaking, rinse the loosened contamination away with water. A suitable soft brush may be used when permitted by the suppressor manufacturer. How long should the suppressor be soaked? Allow at least two hours for normal fouling. For heavy fouling or a high shot count, the cleaner may be warmed to 40 °C and the exposure time extended to approximately 4–8 hours. Extremely dirty suppressors may be soaked for up to 24 hours. Is brushing required during cleaning? Usually not, because the liquid dissolves and neutralises combustion residue while the suppressor is soaking. A soft brush may help remove loosened dirt from dismantled components, but abrasive brushes or metal tools should not be used unless approved by the suppressor manufacturer. What does the colour change indicate? The colour change shows that the cleaner is reacting with contamination and combustion residue inside the suppressor. It helps indicate cleaning progress, but the suppressor must still be rinsed thoroughly and the process repeated if soot particles remain. Can it be used in an ultrasonic bath? Yes, Ballistol lists the cleaner as suitable for ultrasonic-bath use. Check the instructions for both the ultrasonic cleaner and the suppressor first to confirm that the materials and surface treatments are compatible with this method. Is the cleaner suitable for every suppressor? Ballistol states that common materials are not attacked, but suppressors are made from many different metals, coatings and composite materials. Always consult the suppressor manufacturer’s maintenance instructions and test compatibility on a small inconspicuous area when uncertain. Can the suppressor be used immediately after rinsing? No. Drain the suppressor completely and allow it to dry before installation or firing. No water or cleaning liquid should remain inside it. Can it clean carbon-fouled firearm components? Yes. Ballistol also lists the product for cleaning carbon-fouled parts from gas-operated firearms and AR-15-type platforms. After soaking, rinse and dry the components and maintain them according to the firearm manufacturer’s instructions. When is Ballistol Silencer Cleaner the right choice? This cleaner is useful when soot and combustion residue have accumulated inside a suppressor whose internal construction is difficult to reach mechanically. The liquid reaches chambers, openings and baffle surfaces, making it particularly suitable for maintaining sealed suppressors. A specialised bore cleaner is more suitable for metallic deposits inside the barrel, while a gun-parts cleaner is intended for general firearm mechanisms. Gun oils and greases provide lubrication and corrosion protection. Silencer Cleaner is formulated specifically to dissolve combustion residue inside suppressors. Expert recommendation Consult the suppressor manufacturer’s maintenance instructions before cleaning. Not every suppressor may be immersed, heated, dismantled or placed in an ultrasonic bath. Manufacturer approval is particularly important with carbon-fibre sleeves, specialised coatings and multi-material construction. Rinse the suppressor until no visible soot particles remain in the water. Shake out excess water and allow it to dry completely with the openings facing downwards. Do not apply oil inside the suppressor unless its manufacturer specifically recommends it. The dry external surface may be lightly protected with a compatible gun oil when permitted by the finish manufacturer. The cleaning liquid can cause serious eye damage. Wear chemical-resistant gloves and eye protection, work in a well-ventilated area and prevent splashes from reaching the eyes or skin. An easier way to remove suppressor fouling Ballistol Silencer Cleaner dissolves and neutralises accumulated combustion residue without continuous brushing. Its acid-free formulation, colour indicator and suitability for both sealed and dismantlable suppressors make it a useful product for regular suppressor maintenance.
Ballistol Silencer Cleaner is an acid-free cleaning liquid for dissolving soot and combustion residue inside firearm suppressors. It works largely without mechanical assistance during soaking, can be used with both sealed and dismantlable suppressors, and changes colour as contamination is released. The recommended exposure time for normal fouling is at least two hours. Suitable for use Cleaning dismantlable suppressors Cleaning sealed or non-dismantlable suppressors Removing soot from internal suppressor components Dissolving and neutralising combustion residue Cleaning chambers, baffles and narrow internal openings Thorough maintenance after a high number of shots Soak-cleaning suppressors and their components Use in a suitable ultrasonic bath Cleaning carbon-fouled parts from gas-operated firearms Cleaning carbon-fouled components from AR-15-type firearms Why choose Ballistol Silencer Cleaner? Dissolves and neutralises combustion residue Removes accumulated carbon and soot Works during soaking without continuous mechanical cleaning Suitable for dismantlable and sealed suppressors Acid-free formulation Gentle on common materials Built-in colour indicator shows the cleaning process Contains surface-active cleaning agents Includes a corrosion-protection additive Suitable for ultrasonic-bath use Miscible with water and easy to rinse out The 500 ml bottle can be used for filling a suppressor or soaking components Technical specifications Product code: 23381 EAN: 4017777233810 Manufacturer: Ballistol Product name: Silencer Cleaner Product type: Suppressor-cleaning liquid Intended use: Dissolving and neutralising soot and combustion residue Contents: 500 ml Container: Bottle Application: Filling, soaking or immersing components Normal exposure time: At least 2 hours Heavy-fouling exposure time: Approximately 4–8 hours Extreme-fouling exposure time: Up to 24 hours Recommended cleaner temperature for heavy fouling: Up to 40 °C Recommended rinsing-water temperature: Approximately 35 °C Suitable for ultrasonic baths: Yes Acid-free: Yes Colour indicator: Yes Corrosion-protection additive: Yes Appearance: Colourless and clear Odour: Characteristic orange scent pH value: 8 Boiling point: Approximately 80 °C Relative density: 1.05 g/cm³ at 20 °C Solubility in water: Miscible Signal word: Danger Hazard: Causes serious eye damage Composition: Contains orange terpenes that may cause an allergic reaction Supplied with Ballistol Silencer Cleaner 500 ml bottle Frequently asked questions Is it suitable for a non-dismantlable suppressor? Yes. Seal one end of the suppressor with a suitable plug and fill it with cleaning liquid. Allow at least two hours for normal fouling. Empty the cleaner, fill the suppressor approximately halfway with water at about 35 °C, close the openings and shake it thoroughly. How is a dismantlable suppressor cleaned? Dismantle the suppressor only as described by its manufacturer and immerse the parts completely in the cleaning solution. After soaking, rinse the loosened contamination away with water. A suitable soft brush may be used when permitted by the suppressor manufacturer. How long should the suppressor be soaked? Allow at least two hours for normal fouling. For heavy fouling or a high shot count, the cleaner may be warmed to 40 °C and the exposure time extended to approximately 4–8 hours. Extremely dirty suppressors may be soaked for up to 24 hours. Is brushing required during cleaning? Usually not, because the liquid dissolves and neutralises combustion residue while the suppressor is soaking. A soft brush may help remove loosened dirt from dismantled components, but abrasive brushes or metal tools should not be used unless approved by the suppressor manufacturer. What does the colour change indicate? The colour change shows that the cleaner is reacting with contamination and combustion residue inside the suppressor. It helps indicate cleaning progress, but the suppressor must still be rinsed thoroughly and the process repeated if soot particles remain. Can it be used in an ultrasonic bath? Yes, Ballistol lists the cleaner as suitable for ultrasonic-bath use. Check the instructions for both the ultrasonic cleaner and the suppressor first to confirm that the materials and surface treatments are compatible with this method. Is the cleaner suitable for every suppressor? Ballistol states that common materials are not attacked, but suppressors are made from many different metals, coatings and composite materials. Always consult the suppressor manufacturer’s maintenance instructions and test compatibility on a small inconspicuous area when uncertain. Can the suppressor be used immediately after rinsing? No. Drain the suppressor completely and allow it to dry before installation or firing. No water or cleaning liquid should remain inside it. Can it clean carbon-fouled firearm components? Yes. Ballistol also lists the product for cleaning carbon-fouled parts from gas-operated firearms and AR-15-type platforms. After soaking, rinse and dry the components and maintain them according to the firearm manufacturer’s instructions. When is Ballistol Silencer Cleaner the right choice? This cleaner is useful when soot and combustion residue have accumulated inside a suppressor whose internal construction is difficult to reach mechanically. The liquid reaches chambers, openings and baffle surfaces, making it particularly suitable for maintaining sealed suppressors. A specialised bore cleaner is more suitable for metallic deposits inside the barrel, while a gun-parts cleaner is intended for general firearm mechanisms. Gun oils and greases provide lubrication and corrosion protection. Silencer Cleaner is formulated specifically to dissolve combustion residue inside suppressors. Expert recommendation Consult the suppressor manufacturer’s maintenance instructions before cleaning. Not every suppressor may be immersed, heated, dismantled or placed in an ultrasonic bath. Manufacturer approval is particularly important with carbon-fibre sleeves, specialised coatings and multi-material construction. Rinse the suppressor until no visible soot particles remain in the water. Shake out excess water and allow it to dry completely with the openings facing downwards. Do not apply oil inside the suppressor unless its manufacturer specifically recommends it. The dry external surface may be lightly protected with a compatible gun oil when permitted by the finish manufacturer. The cleaning liquid can cause serious eye damage. Wear chemical-resistant gloves and eye protection, work in a well-ventilated area and prevent splashes from reaching the eyes or skin. An easier way to remove suppressor fouling Ballistol Silencer Cleaner dissolves and neutralises accumulated combustion residue without continuous brushing. Its acid-free formulation, colour indicator and suitability for both sealed and dismantlable suppressors make it a useful product for regular suppressor maintenance.
