allistol Weapon Parts Cleaner is a fast-acting aerosol for cleaning firearm components, guide surfaces and hard-to-reach areas.
Ballistol Weapon Parts Cleaner is a fast-acting aerosol for cleaning firearm components, guide surfaces and hard-to-reach areas. Its powerful spray pressure flushes away loosened dirt, while the supplied nylon brush helps remove more persistent deposits. The acetone-free cleaner dries without leaving residue. Suitable for use Cleaning serviceable firearm components Cleaning bolts and receivers Cleaning slides, guide surfaces and rails Cleaning accessible trigger-mechanism components Removing dirt, grease and old oil Flushing hard-to-reach areas Degreasing components before fresh lubricant is applied Routine maintenance of rifles, pistols and revolvers Hunters, sport shooters and firearm owners Why choose Ballistol Weapon Parts Cleaner? Powerful spray pressure helps flush away dirt Reaches narrow gaps and recessed areas Supplied with a sturdy attachable nylon brush The brush helps loosen stubborn deposits from surfaces and guides Dries quickly without leaving residue Acetone-free formulation High material compatibility according to the manufacturer Suitable for different firearm components Pleasant fruity fragrance Practical 250 ml aerosol can Technical specifications Intended use: Cleaning and degreasing firearm components Contents: 250 ml Application: Aerosol spray Spray characteristic: High-pressure Cleaning formulation: Citrus Power Acetone-free: Yes Drying: Fast and residue-free Material compatibility: High, according to the manufacturer Appearance: Colourless and clear Odour: Fruity Relative density: Approximately 0.74 g/cm³ Solvent vapour pressure: Approximately 59 hPa at 20 °C Solvent ignition temperature: Approximately 425 °C Hazard classification: Extremely flammable aerosol Container: Pressurised aerosol can Maximum storage temperature: Below +50 °C Supplied with Ballistol Weapon Parts Cleaner 250 ml aerosol Attachable nylon brush Frequently asked questions Is Ballistol Weapon Parts Cleaner a gun oil? No. It is a cleaning and degreasing product that evaporates without leaving residue. Sliding surfaces and metal parts requiring corrosion protection must be treated with a suitable gun oil or grease after cleaning. Which firearm components can be cleaned with it? The manufacturer describes the product as suitable for all firearm components and states that it has high material compatibility. Typical applications include bolts, receivers, slides, guide surfaces and other accessible parts. Compatibility should still be tested on an inconspicuous area when working with sensitive coatings, plastics or rubber. Can it be used to clean a barrel? It can remove general dirt, oil and loose residue from the bore. A dedicated bore cleaner should be used for more thorough removal of copper, tombac, zinc or lead deposits. Does it leave a protective coating? No. The cleaner dries without leaving residue and does not provide lubrication or long-term corrosion protection. Apply a thin layer of suitable gun oil to clean metal surfaces when protection is required. How is the supplied nylon brush used? Attach the brush according to the product instructions. Spray the cleaner onto the dirty area, loosen persistent residue with the brush and use another short spray to flush away the released dirt. Allow the components to dry fully before lubrication and reassembly. How should the aerosol be used safely? First confirm that the firearm is completely unloaded and remove all ammunition from the work area. Use the cleaner in a well-ventilated location away from flames, sparks and hot surfaces. Do not smoke during use, and never pierce or burn the pressurised container. When is Ballistol Weapon Parts Cleaner the right choice? This cleaner is a practical option when bolts, guide surfaces and other firearm components need to be freed from dirt and old lubricant. Its high spray pressure is particularly useful for narrow gaps and recessed areas that are difficult to reach with a cloth. Weapon Parts Cleaner does not replace gun oil, ceramic grease or a specialised bore solvent. A corrosion-protecting oil is more suitable for preservation, grease is preferable on heavily loaded sliding surfaces, and a dedicated bore cleaner is required for stubborn metallic deposits inside the barrel. Expert recommendation Before cleaning, inspect the chamber and magazine and remove all ammunition from the work area. Field-strip the firearm only as described in its manual. Apply the cleaner in short bursts and use the supplied brush where old grease or dirt has adhered to the surface. Avoid spraying the product directly onto optical surfaces, ammunition, electronic sights, untreated wood or finishes whose solvent resistance has not been confirmed. Allow the cleaner to evaporate completely before applying a small amount of the correct lubricant. Protect the aerosol from sunlight, ignition sources and temperatures above +50 °C. Fast, residue-free cleaning of firearm components Ballistol Weapon Parts Cleaner combines powerful spray pressure, an acetone-free formulation and an attachable nylon brush. It provides a practical way to degrease firearm components and remove dirt from hard-to-reach areas before fresh lubricant is applied.
Ballistol Weapon Parts Cleaner is a fast-acting aerosol for cleaning firearm components, guide surfaces and hard-to-reach areas. Its powerful spray pressure flushes away loosened dirt, while the supplied nylon brush helps remove more persistent deposits. The acetone-free cleaner dries without leaving residue. Suitable for use Cleaning serviceable firearm components Cleaning bolts and receivers Cleaning slides, guide surfaces and rails Cleaning accessible trigger-mechanism components Removing dirt, grease and old oil Flushing hard-to-reach areas Degreasing components before fresh lubricant is applied Routine maintenance of rifles, pistols and revolvers Hunters, sport shooters and firearm owners Why choose Ballistol Weapon Parts Cleaner? Powerful spray pressure helps flush away dirt Reaches narrow gaps and recessed areas Supplied with a sturdy attachable nylon brush The brush helps loosen stubborn deposits from surfaces and guides Dries quickly without leaving residue Acetone-free formulation High material compatibility according to the manufacturer Suitable for different firearm components Pleasant fruity fragrance Practical 250 ml aerosol can Technical specifications Intended use: Cleaning and degreasing firearm components Contents: 250 ml Application: Aerosol spray Spray characteristic: High-pressure Cleaning formulation: Citrus Power Acetone-free: Yes Drying: Fast and residue-free Material compatibility: High, according to the manufacturer Appearance: Colourless and clear Odour: Fruity Relative density: Approximately 0.74 g/cm³ Solvent vapour pressure: Approximately 59 hPa at 20 °C Solvent ignition temperature: Approximately 425 °C Hazard classification: Extremely flammable aerosol Container: Pressurised aerosol can Maximum storage temperature: Below +50 °C Supplied with Ballistol Weapon Parts Cleaner 250 ml aerosol Attachable nylon brush Frequently asked questions Is Ballistol Weapon Parts Cleaner a gun oil? No. It is a cleaning and degreasing product that evaporates without leaving residue. Sliding surfaces and metal parts requiring corrosion protection must be treated with a suitable gun oil or grease after cleaning. Which firearm components can be cleaned with it? The manufacturer describes the product as suitable for all firearm components and states that it has high material compatibility. Typical applications include bolts, receivers, slides, guide surfaces and other accessible parts. Compatibility should still be tested on an inconspicuous area when working with sensitive coatings, plastics or rubber. Can it be used to clean a barrel? It can remove general dirt, oil and loose residue from the bore. A dedicated bore cleaner should be used for more thorough removal of copper, tombac, zinc or lead deposits. Does it leave a protective coating? No. The cleaner dries without leaving residue and does not provide lubrication or long-term corrosion protection. Apply a thin layer of suitable gun oil to clean metal surfaces when protection is required. How is the supplied nylon brush used? Attach the brush according to the product instructions. Spray the cleaner onto the dirty area, loosen persistent residue with the brush and use another short spray to flush away the released dirt. Allow the components to dry fully before lubrication and reassembly. How should the aerosol be used safely? First confirm that the firearm is completely unloaded and remove all ammunition from the work area. Use the cleaner in a well-ventilated location away from flames, sparks and hot surfaces. Do not smoke during use, and never pierce or burn the pressurised container. When is Ballistol Weapon Parts Cleaner the right choice? This cleaner is a practical option when bolts, guide surfaces and other firearm components need to be freed from dirt and old lubricant. Its high spray pressure is particularly useful for narrow gaps and recessed areas that are difficult to reach with a cloth. Weapon Parts Cleaner does not replace gun oil, ceramic grease or a specialised bore solvent. A corrosion-protecting oil is more suitable for preservation, grease is preferable on heavily loaded sliding surfaces, and a dedicated bore cleaner is required for stubborn metallic deposits inside the barrel. Expert recommendation Before cleaning, inspect the chamber and magazine and remove all ammunition from the work area. Field-strip the firearm only as described in its manual. Apply the cleaner in short bursts and use the supplied brush where old grease or dirt has adhered to the surface. Avoid spraying the product directly onto optical surfaces, ammunition, electronic sights, untreated wood or finishes whose solvent resistance has not been confirmed. Allow the cleaner to evaporate completely before applying a small amount of the correct lubricant. Protect the aerosol from sunlight, ignition sources and temperatures above +50 °C. Fast, residue-free cleaning of firearm components Ballistol Weapon Parts Cleaner combines powerful spray pressure, an acetone-free formulation and an attachable nylon brush. It provides a practical way to degrease firearm components and remove dirt from hard-to-reach areas before fresh lubricant is applied.
